This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Switchable hi-pass filter and rugged turned-brass microphone housing
Custom shock mount provides superior isolation
Microphone Connectivity - Wired
Microphone Type - Electret Condenser
Polar/Pickup Pattern - Cardiod
Spec Sheet available - Yes
Impedance:
100 ohms
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Dynamic Range:
121 dB
Impedance:
100 ohm
Maximum SPL (Sound Pressure Level):
145 dB
Signal to Noise Ratio:
70 dB
Wireless:
No
Current Draw:
0.03 Amps
DC Voltage:
48 Volts
Product Weight:
0.26 lbs
Element:
Fixed-charge back plate, permanently polarized condenser
Low Frequency Roll-off:
80Hz, 12dB/octave
Sensitivity:
-36 dB
Length:
6.28 in
Body Diameter:
0.83 in
connector type:
Integral 3-pin XLRM
Accessories Furnished:
AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case