Power supply is support the myriad touchpanels, keypads, and other peripherals that make up a control system, it is provides a convenient and compact centralized power and termination solution. Power is supplied on eight individually managed outputs. Each output is rated for up to 75W, with a total system rating of 300W. Electronic circuit breaker protection is provided on every output, which can be individually monitored and reset from the control system. The voltage level at each output can even be monitored along with ambient temperature and fault status for the complete power supply system.
300W regulated power supply
8 independently managed outputs
16 cresnet distribution ports
Cresnet monitoring and control
Expands the cresnet power and distribution capabilities of any 2-Series control system
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
41 F
AC Voltage:
240 Volts
Depth:
3.29 in
Height:
5.19 in
Width:
13.25 in
Product Weight:
5.30 lbs
Load Ratings - Per Channel:
75W (3.125A) at 24Vdc regulated
Load Ratings - System Total:
300W (12.5A) at 24Vdc regulated
Load Ratings - Ripple/Noise:
<150 mV
Load Ratings - Load Protection:
Electronic circuit breaker per channel, each rated at 75W nominal/100W maximum, 4A, 125V internal fuse, all channels shut off in case of total system overload
Load Rating - Sequential Startup:
Outputs activate sequentially when power supply system is enabled
Chassis:
Aluminum, black anodized with polycarbonate label overlay, convection-cooled, vented top and sides
CRESNET-HP-NP
- 22AWG Cresnet High-power Control Cable, Non-plenum
CRESNET-NP
- 18/24AWG Cresnet Control Cable, Non-plenum