Signal Processing Systems : Related Signal Processing Products : Ensemble Designs - BENXT-910

BrightEye NXT 910 4 Channel HDMI/SDI Frame Sync with HDCP

Model: BENXT-910

Automatic format and frame rate conversion
From SD to 3G, and everything in-between
Video proc amp and color correction
Audio channel swap and level adjust
SFP ports for HDMI, fiber, composite, or additional SDI I/Os

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The new BrightEye NXT 910 HDMI/SDI Frame Synchronizer is perfect solution for Blu-Ray players, satellite receivers, GoPro’s and other HDMI devices. The NXT 910 packs tons of features in a tiny package, including Frame Synchronization and Format Conversion, with 16 channels of embedded Audio. The NXT 910 has four independent frame synchronizers. Each supports automatic input format detection and conversion to desired output format. Adjust video and chroma gains with the built-in Proc Amp. Color Correct to compensate for input material or to match projectors and monitors. Adjust levels and swap/mix channels in Embedded Audio. Even embedded surround sound (Dolby, AC-3) is synchronized from input to output. Control the Frame Syncs and monitor each channel’s input and output from the front panel, or through the interactive Web interface. Rackmount three NXT 910s in a single RU for the ultimate processing density.

Automatic format and frame rate conversion
From SD to 3G, and everything in-between
Video proc amp and color correction
Audio channel swap and level adjust
SFP ports for HDMI, fiber, composite, or additional SDI I/Os
HDMI and HDCP support
Front panel live monitor
Monitor pre- and post-processed signals

Rackmountable - Yes

Depth: 6.75 in
Height: 1.65 in
Width: 5.63 in
DC Voltage: 120 Volts
Product Weight: 1 lbs
Active Power: 35 Watt
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 230 Volts
Regulatory Compliance: HDCP
Serial Digital Outputs :
•Number: Four
SDI Standards Supported - for both Input and Output:
•1080i 50, 59.94 or 60 Hz, SMPTE 274M -4,5,6
•720p 50, 59.94 or 60 Hz, SMPTE 296M -1,2,3
•1080p 23.98, 24 or 25 Hz, SMPTE 274M -9,10,11
•1080p 50, 59.94, 60 Hz, SMPTE 424M, 425M, Level A
•1080sF 23.98, 24 or 25 Hz, RP211 -14,15,16
•625i 50
•525i 59.94
HDMI Inputs:
•Number: Four
•Type: HDMI 1.3
•Audio: Up to 8 Channels
•HDCP: Supported
STANDARDS::
•1080i 50, 59.94 or 60 Hz, SMPTE 274M -4,5,6
•720p 50, 59.94 or 60 Hz, SMPTE 296M -1,2,3
•1080p 23.98, 24 or 25 Hz, SMPTE 274M -9,10,11
•1080p 50, 59.94, 60 Hz, SMPTE 424M, 425M, Level A
•1080sF 23.98, 24 or 25 Hz, RP211 -14,15,16
•625i 50
•525i 59.94
HDMI Monitor Output:
•Number: One
•Type: HDMI 1.3
•Audio: 8 Channels
•Format: Follows channel configuration
SFP (Small Format Pluggable) Interfaces:
•Number: One
•Ports: HDMI: One per SFP
•SDI, Fiber: Two per SFP
•IP Encapsulate (SMPTE 2022, and more): One per SFP
•Usage: Assignable to Channel Input or Output
•As Input: in place of SDI or HDMI
•As Output: in addition to SDI
Frame Synchronizers:
•Number: Four
•Range: Infinitely adjustable in H and V
Format Conversion:
•Integrated with Frame Synchronizer
•Automatic conversion from any input to configured output format
Audio Synchronization:
•Sample Rate Conversion of Embedded PCM Audio
•SDI Inputs Supports 16 channels
•HDMI Inputs Supports 8 channels
•Re-Synchronization of encoded Surround Sound Dolby-E, Dolby-D, AC-3 Automatically detected
Reference Input:
•Number: One
•Type: 1 V P-P Composite Video, PAL or NTSC or Tri-Level Sync
•Impedance: 75-ohm
•Return Loss: >40dB
Ethernet Control:
•Type: RJ-45
•Speed: 10/100 Mb/s
•Protocols: HTTP, TCP/IP