Fiber Optic Systems : Related Fiber Optic Products : Evertz - 2400ODU-2T

Integrated Outdoor Fiber Transmission System with Two 2408LT13 Fiber Transmitters Installed

Model: 2400ODU-2T

Minimizes length of coax run from LNB
Convenient, time-saving pre-integrated package
Each fiber transmitter provides a coaxial monitoring output
Lightning protection included on RF inputs
Weather sealed enclosure with durable powder coat finish

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The 2400ODU provides a convenient, pre-integrated package for fiber transport of Satellite and other signals within the extended L-Band range. Contained in a compact, weatherproof enclosure are up to four 2408LT fiber optic transmitters and a 2400PSU-8 power supply. This provides the needed equipment to transport up to four RF signals over individual fibers and power the connected LNBs. The 2400ODU may be conveniently mounted directly on or near the antenna structure.

Minimizes length of coax run from LNB
Convenient, time-saving pre-integrated package
Each fiber transmitter provides a coaxial monitoring output
Lightning protection included on RF inputs
Weather sealed enclosure with durable powder coat finish
Wide operating temperature range
Redundant power supply
SmartMON™ monitoring without a separate data connection
Additional fiber transmitters are field-installable
Knockouts provided for termination of AC power and fiber conduits
SmartMON™ equipped 2408LT's provide remote monitoring capabilities without a separate data connection
All modules are field replaceable and fiber transmitter modules are hot swappable
Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): -4 F
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 9 in
Height: 16 in
Width: 16 in
Number of RF Inputs: 1-4 depending on number of installed fiber transmitters
RF connector: F-Type (N-type optional)
Impedance: 75ohm, 50ohm optional
Frequency Range: 1310nm FP Laser 850MHz to 3000MH
Input Power Range: -10dBm to -50dBm
LNB Power Voltage: 18VDC, 13.5VDC, off (selectable)
LNB Power Current: 500 mA
Protection: Short Circuit, current limited
LO Control: 22kHz on/off (selectable)
Number of Optical Outputs: 1-4 depending on number of installed fiber transmitters
Optical Connector: Female
Operating wavelength: 1310 Nm
Output Power: +2 dBm
Number of Inputs: Single or dual (protected) power sources can be accommodated
Connector: Direct wiring to duplex NEMA5-15R receptacle inside enclosure (For North American applications)
Frequency: 47 to 63 Hz
Power: 1A maximum per input
Finish: RAL7035 textured light grey powder coat

2400ODU - Integrated Outdoor RF Fiber Transmission System

Outdoor Integrated RF Fiber Transmission System 304 kb - Data Sheet

Project List

2400ODU-4GT
Replacement Gas Tubes for 2400ODU Surge Supressors, Package of Four

Find a Dealer