The 7707ET is a VistaLINK capable Ethernet Fiber Transceiver that provides an economical method of transmitting two 10BaseT Ethernet channels or one 100Base-TX Ethernet channel over optical fiber. The transceiver is IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX compliant. It mediates between a 10/100BASE-TX segment and supports both full duplex and half-duplex operation. Monitoring of card status and parameters is provided locally at the card edge and remotely via VistaLINK. A pair of 7707ET transceivers permits full duplex communication over single or dual optical fibers. Diagnostic LEDs provide indication of power, link status and data reception.
Two 10BaseT Ethernet channels or one 100Base-TX Ethernet channel
Auto negotiation for 10/100 speed and half/full duplex modes
Comprehensive signal and card status monitoring via four digit card edge display or remotely through
SNMP and VistaLINK capability
Local display of optical signal strength, link parameters and link status
Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fully hot-swappable from front of frame with no fiber or Ethernet channel disconnect required
SC/PC, ST/PC or FC/PC connector options
VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK Frame Controller