Signal Processing Systems : AV Input / Output Boards & Cards : Kramer - F676-OUT2-F16

4K60 4:2:0 HDMI over Ultra-Reach MM/SM Fiber Optic Output Card

Model: F676-OUT2-F16

Part #: 20-70027998

High Performance Standard Fiber Extender - HDMI fiber transmitter for providing ultra-reach signals over either multi-mode or single-mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi-mode SFP+ included). Near-zero latency vi
Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi-performance OSP SFP+ pluggable optical units.
Multi-drop Signal Distribution - Use optical splitters to extend the signals from the output to multiple compatible receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution ampl
HDMI Signal Extension - HDCP 2.2 compliant and supports up to 10.2G (3.4G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS-HD.
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

F676-OUT2-F16 is a high-performance HDMI fiber optic modular matrix output card for ultra-reach extension of 4K at 60Hz (4:2:0) HDMI signals. Designed for the VS-1616DN-EM modular matrix, F676-OUT2-F16 converts HDMI and RS-232 input signals to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS-232 signals. F676-OUT2-F16 includes a multi-mode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a single-mode SFP+ transceiver.

High Performance Standard Fiber Extender - HDMI fiber transmitter for providing ultra-reach signals over either multi-mode or single-mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi-mode SFP+ included). Near-zero latency vi
Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi-performance OSP SFP+ pluggable optical units.
Multi-drop Signal Distribution - Use optical splitters to extend the signals from the output to multiple compatible receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution ampl
HDMI Signal Extension - HDCP 2.2 compliant and supports up to 10.2G (3.4G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS-HD.
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Bidirectional RS-232 Extension - Serial interface data flows in both directions, to enable data transmission and control of devices.
Cost-Effective Maintenance - Fiber link connection LEDs facilitate easy local troubleshooting.
Application:
Highly secured and ultra-long extension of controllable AV signals for: governmental, medical, and rental and staging applications.
Point-to-multipoint optical distribution of controllable AV signals over large spaces.
Multipoint-to-multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices.
Ultra-long signals extension for multi-room and inter-building connectivity.

Input/Output Board/Card Type - Video
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, UL, WEEE
Depth: 5.12 in
Height: 0.79 in
Width: 7.48 in
Product Weight: 0.40 lbs
Shipping Weight: 0.60 lbs
Output: 2 Fiber Optic: On LC connectors
Ports: 2 RS-232: On a 3-pin terminal block connector
Video: Max Bandwidth: 10.2Gbps, Max Resolution: 4096x2160 at 60Hz 4K at 60 (4:2:0), HDMI Support: 10.2G (3.4G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS-HD, Content Protection: HDCP 2.2
EXTENSION LINE: Optical Fiber: Multi-mode (MM) or single-mode (SM), Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included)
MULTI-MODE LINE: Compliance: G.651.1 OFNR fiber, Max Reach over OM3 MM Fiber: 3km (1.8 miles)
SINGLE-MODE LINE: Compliance: G.652D OFNR fiber, Max Reach over OS1 SM Fiber: 33km (20.5 miles)
Extended RS-232: Baud Rate: 300 to 115200
User Interface: Indicators: Optical link LEDs
Storage Temperature: -40 to +70 Degrees C (-40 to 158 Degrees F)
Humidity: 10% to 90%, RHL non-condensing
Accessories: Included: 2 MM SFP+ transceivers

Output Card 112878 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

4K/60fps HDMI-to-USB plug-and-play external video capture device with loop-through, embedded and analog audio

by Magewell Electronics

8-slot 2RU DigitalMedia Card Chassis for DM-NVX-C and DMCF Cards

by Crestron Electronics, Inc.

M.2 4Kp60 1-channel video capture card with low power consumption and HDMI interface

by Magewell Electronics