Signal Processing Systems : Distribution Amplifiers : Kramer - TP-410

1:10 Computer Graphics Video, Audio & RS-232 over Twisted Pair Transmitter & Distribution Amplifier

Series: Main

Model: TP-410

Part #: 50-71020010

Resolution - Up to and including WUXGA (1920x1080)
Selectable Inputs - Local or twisted pair (WUXGA, audio and RS-232)
Data Handling - Extensive bidirectional RS-232 embedding, de-embedding and other options
Selectable Analog or Digital Audio Input
EDID Capture - Copies and stores the EDID from a display device

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TP-410 is a high-performance distribution amplifier for computer graphics up to WUXGA or twisted pair video, unbalanced stereo or S/PDIF audio, and bi-directional RS-232 signals. The RS-232 and selected audio/video inputs, distributed to ten twisted pair outputs.

Resolution - Up to and including WUXGA (1920x1080)
Selectable Inputs - Local or twisted pair (WUXGA, audio and RS-232)
Data Handling - Extensive bidirectional RS-232 embedding, de-embedding and other options
Selectable Analog or Digital Audio Input
EDID Capture - Copies and stores the EDID from a display device
Transmission Range - Up to 300ft (100m) over STP cabling
Flexible Control Options - Front panel, RS-232, RS-485, Ethernet
Controls - Source selection buttons, power and source indicator LEDs, TP LEVEL and EQ trimmers
Worldwide Power Supply - 100-240V AC
Standard 19” Rack Mount Size - 1U. Rack "ears" included
Audio - U/D
Includes:
- Power cord
- Windows® based control software
- Rack ears
Applications:
- Transmission of video, audio and RS-232 signals for extended distances over standard STP/UTP cables
- Multimedia and presentation source and acceptor selection

DA Audio Input - 3.5 mm mini
DA Audio Output - 3.5 mm mini
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Depth: 7.52 in
Height: 1 in
Width: 19 in
Mount Type: Rack
Number of Inputs: 1
Number of Outputs: 10
Rack Units (Height): 1
Product Weight: 8.40 lbs
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Mounting Width: 19 in
Transmission Range: 300 ft
Certifications: CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Regulatory Compliance: WEEE
Warranty (Length/Type): 7 Years Limited
Inputs: 1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 twisted pair on an RJ-45 connector
Outputs: 10 twisted pairs on RJ-45 connectors, 1 UXGA on 15-pin HD connectors, 1 unbalanced stereo audio 3.5mm mini jacks, 1 S/PDIF on RCA connectors
Control Ports: RS-232 3-pin terminal block (data and control), RS-485 3-pin terminal block (data and control), RJ-45 Ethernet (data and control)
Resolution: Up to WUXGA (1920 x 1200) and 2k
Max. Output Level: Video: 1.6Vpp, Audio: 2.3Vpp
Controls: RS-232/RS-485/Ethernet program control, source control from front panel, TP-IN level and equalization from rear panel
Serial Baud Rate: Up to 19200 bps
SERIAL MODE: Full-duplex
Bandwidth: AUDIO: 20Hz to 20kHz @0.5dB
S/N Ratio: Audio: <-80dB
Total Gain: Audio: 0dB
Coupling: Audio: AC
Audio THD + Noise: <0.03%
Storage Temperature: -40° to +70°C (-40° to 158°F)
Humidity: 10% to 90%, RHL non-condensing
Power Consumption: 100-240V AC, 16VA
Included Accessories: Power cord, Windows® based control software, rack “ears”

TP-410.pdf 205 kb - Data Sheet

Project List

tp-410.pdf 2481 kb - Other

Project List

Find a Dealer

Find a Distributor

Suggested Products

openGear Dual 1x4 12G-SDI Distribution Amplifier

by AJA Video

Alfatron SUK4T HDBaseT Splitter Kit

by Alfatron Electronics, Inc.

18Gbps Distribution Amplifier with Advanced EDID Management, Audio Extraction and Scaling

by AVPro Edge