The DigitaLinx DL-HD70 HDBaseT extender set transmits HDMI, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected. The DL-HD70 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
HDMI transmission up to 230 feet (70m)
1080p, 4Kx2K & 3D compatible
CEC supported
Built-in surge protection
Diagnostic LEDs
HDCP compliant
Bidirectional Wideband IR and RS232 passthrough
Flexible power design (use power supply at TX or RX)
Locking Power Connector
Applications:
Uses any Cat6 or greater twisted pair cabling
Extension of HDMI and control signals
Limited access to power for extenders on both ends
Ideal for Digital Signage, Home Theater, Commercial Video
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Supported Resolution - SVGA (800x600)
Supported Resolution - WUXGA (1920x1200)
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Transmission Range:
230 ft
Color:
Black
Warranty (Length/Type):
2 Years
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Certifications:
CE
ROHS Compliant:
Yes
Signal to Noise Ratio:
70 dB
DC Voltage:
18 Volts
Depth:
2.95 in
Height:
0.59 in
Width:
5.32 in
Product Weight:
1.81 lbs
Regulatory Compliance:
CE, RoHS
ESD Protection:
15 KV
Storage Temperature:
-10 to +60 ° C
Total Harmonic Distortion (THD):
< 0.005 % At 1 KHz