hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Network Technologies Inc (NTI) - IPDU-S2
Network Technologies Inc (NTI) - IPDU-S2 Network Technologies Inc (NTI) - IPDU-S2
Request Quote
network-technologies-nti

Secure Remote Power Control Unit with Environmental Monitoring

Model: IPDU-S2

  • Three operating modes for power reboot: Manual – select the outlet and turn the power on/off. Scheduled – set date/time/duration of power cycle. Associated – power on/off a device when a sensor goes out of range of a user-defined threshold, or reboot unresponsive IP devices.
  • Security: HTTPS, SSHv2, SSLv3, TLS (4/8-port models only), IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
  • Configure, control and monitor the unit via Web interface or Command Line Interface (CLI).
  • Up to 3 additional IP aliases can be configured to allow remote control of the unit using different networks. No scripts required - simply add the IP address, network mask, and gateway configurations through the web interface. The first network (default network) will be used for total control of the unit, i.e. inbound and outbound connections. The three other networks will allow web/SSH/telnet access only, i.e. inbound access only. Up to four separate networks can be plugged into a network switch that is linked to the unit to facilitate the configuration.
  • Current, line voltage, line frequency, power factor monitoring (4/8-port models only).
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories

Customer Testimonials

The ENVIROMUX® Secure Remote Power Control Unit allows you to remotely reboot and control power (on/off) to up to eight servers or other powered devices from any location via secure web interface, RS232, SSH, or Telnet.

Available sensors

Web Interface ( view product demo)

Open Source Monitoring Integration

Stencil Drawing:

Firmware:

Knowledge Base:

Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 ENVIROMUX-2D/5D/16D, ENVIROMUX-SEMS-16(U), IPDU-S4/8 units and all connected sensors.

Learn more about Graphing Critical Environment Conditions with MRTG here: http://www.networktechinc.com/ipdu-s-mrtg-app.html

  • Three operating modes for power reboot: Manual – select the outlet and turn the power on/off. Scheduled – set date/time/duration of power cycle. Associated – power on/off a device when a sensor goes out of range of a user-defined threshold, or reboot unresponsive IP devices.
  • Security: HTTPS, SSHv2, SSLv3, TLS (4/8-port models only), IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
  • Configure, control and monitor the unit via Web interface or Command Line Interface (CLI).
  • Up to 3 additional IP aliases can be configured to allow remote control of the unit using different networks. No scripts required - simply add the IP address, network mask, and gateway configurations through the web interface. The first network (default network) will be used for total control of the unit, i.e. inbound and outbound connections. The three other networks will allow web/SSH/telnet access only, i.e. inbound access only. Up to four separate networks can be plugged into a network switch that is linked to the unit to facilitate the configuration.
  • Current, line voltage, line frequency, power factor monitoring (4/8-port models only).
  • Monitor (ping) up to eight IP network devices. Supports two environmental sensors, including: temperature/humidity and water detection.
  • Sends alert notifications via email, syslog, LEDs, Web page, and SNMP.
  • Automatically configures network settings received from a connected DHCP server. If a DHCP server is not found, the default static IP address will be used.
  • Integrates with various Open Source monitoring packages - Nagios and MRTG. The unit can be polled via SNMP.
  • Up to 17 units can be connected via Ethernet connection or using CAT5 expansion cables to increase the number of outlets and sensors connected (4- and 8-port models only). Cascade up to 16 IPDU-Sx units as slaves to one IPDU-Sx master unit via Ethernet connection. Each master and slave unit needs its own unique IP address. Cascade up to 16 IPDU-Sx units as slaves to one IPDU-Sx master unit using CAT5/5e/6 patch cables with RJ45 connectors wired straight through. Each slave unit needs its own unique RS485 address value that can range from 1-255. Uses a single Web interface for all systems/sensors connected.
  • Overload protection via circuit breaker (4/8-port models only).
  • Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN 61000-4-2
  • Features Normally Open (NO) relay contacts. The 4/8-port units are available with optional Normally Closed (NC) relay contacts.
  • Optional industrial unit for harsh environments at temperatures from -40° to 158°F (-40° to 70°C).
 
Request Quote