4-Channel High-Performance Amplifier Platform with DSP and Dante, 4 (2 Speakon NL4)

Series: T Series

Model: T604

The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
Full control with a PC running Armonía
Here it can be in mixed groups with advanced EQ together with other Powersoft products
Control from the front panel display for things like preset recall (also per output), gain, delay, mute
This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The T-Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
Full control with a PC running Armonía
Here it can be in mixed groups with advanced EQ together with other Powersoft products
Control from the front panel display for things like preset recall (also per output), gain, delay, mute
This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
Group controllable advanced EQ with raised cosine filters
Large preset library
Preset compatibility with X Series
Very long FIR filters (42.6ms)
Control and monitoring through ArmoníaPlus

Spec Sheet available - Yes

Depth: 19.10 in
Height: 1.80 in
Impedance: 20000 ohm
Width: 16 in
Standby Power: 32 Watt
Product Weight: 14.80 lbs
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Signal to Noise Ratio: 110 dB
Number of Channels: 2
Total Harmonic Distortion + Noise (THD+N): 0.10 %
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts

Amplifier 954186 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Find a Distributor

Suggested Products

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International