Audio Production Equipment : Audio Processors : Q-SYS - DCP 200

16 Channel Digital Cinema Processor

Series: DCP

Model: DCP 200

Digital input for up to 16 channels of audio
Networked audio I/O via CobraNet - supports behind-the-screen mounting of DXP processors for screen channel and subwoofer DCA amplifiers
Handling crossovers and amp connections for screen channels via DXP allows the DCP 200 to offer DCP 300 functionality at a significant savings
Network control and monitoring via SNMP
Serial automation control via RS-232

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

A Cinema Processor and Booth Monitor along with network control and monitoring of DSP, amplifiers and speakers in one integrated package.

Digital input for up to 16 channels of audio
Networked audio I/O via CobraNet - supports behind-the-screen mounting of DXP processors for screen channel and subwoofer DCA amplifiers
Handling crossovers and amp connections for screen channels via DXP allows the DCP 200 to offer DCP 300 functionality at a significant savings
Network control and monitoring via SNMP
Serial automation control via RS-232
Analog inputs for film processors, non-sync and mic/line
Master volume and full 1/3 octave graphic EQ on all channels
Booth monitor with touch screen control for easy operation
DataPorts for surround channel amplifiers
Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
Dual power supplies with load sharing for seamless operation in the event of failure
SD memory card for quick unit swap - restores all settings
Multiple bypass modes routes audio around failed components to insure that the show will go on
DCP Manager and DCPNet PC-based application for set-up, control and monitoring
DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone
Easily integrates with existing film processors for dual film/digital projection systems
CobraNet offers digital audio routing via DXP processors
Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
The DCP 200 is designed expressly for the needs of D-Cinema sound systems

Spec Sheet available - Yes

AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 15.20 in
Height: 5.25 in
Width: 19 in
Product Weight: 16.60 lbs

Processor 679986 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

HDMI Audio Extractor with eARC and ARC

by Vanco International

Audio Delay Device

by Vanco International

16 in/16 out Audio Digital Signal Processor with DANTE

by Alfatron Electronics, Inc.