Speakers : Loudspeakers : Q-SYS - NL-C4-WH

4" Full-range, Low-profile Ceiling-mount Network Loudspeaker, PoE/PoE+ Powered. Includes C-ring and Tile Rails, White

Model: NL-C4-WH

Native PoE ceiling-mount loudspeaker for Q-SYS
4-inch, full-range driver
Powered-over-Ethernet enables power, data, and control over a single cable
Consistent tonal characteristics across the entire NL Series family to let you mix and match form factors
Q-SYS integrates loudspeaker voicings (Intrinsic Correction™) to simplify the tuning process

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Q-SYS NL-C4 is a network PoE loudspeaker that delivers clear speech and music reproduction natively to Q-SYS. The ceiling-mount loudspeaker features a four-inch, full-range driver, and can be integrated into your space with a single Ethernet cable to reduce overall hardware footprint and lower system cost. As a native Q-SYS Product, you can take advantage of the drag-and-drop integration and simple control capabilities offered by Q-SYS.

Native PoE ceiling-mount loudspeaker for Q-SYS
4-inch, full-range driver
Powered-over-Ethernet enables power, data, and control over a single cable
Consistent tonal characteristics across the entire NL Series family to let you mix and match form factors
Q-SYS integrates loudspeaker voicings (Intrinsic Correction™) to simplify the tuning process
Comprehensive management via Q-SYS Designer Software and Q-SYS Reflect Enterprise Manager
Available in white (RAL 9010) only
Full-range ceiling-mount PoE loudspeaker: The Q-SYS NL-C4 features a 4-inch, full-range driver in a ceiling-mount enclosure that delivers both clear speech and music reproduction for any high-value collaboration space.
Mix and Match: NL Series network loudspeakers are built on the same design principles as the Q-SYS AcousticDesign™ Series, featuring a sleek, unobtrusive design along with the same sonic characteristics that allow integrators to mix-and-match form factors
Go Easy: NL Series network loudspeakers are powered-over-Ethernet (PoE), which means native Q-SYS audio data, power and control and are delivered over a single cable, greatly simplifying installation and deployment while reducing rack space requirement.
Intrinsic Correction™: To simplify the tuning process, Q-SYS automatically integrates loudspeaker voicings (Intrinsic Correction™) to simplify the tuning process.
Remote Monitoring and Management: NL Series network loudspeakers are the first loudspeakers that can be automatically monitored and managed by Q-SYS Reflect Enterprise Manager every step of the way, from the audio source all the way through the loudspeake
Designed for Q-SYS: Q-SYS NL Series PoE loudspeakers are native to Q-SYS, a cloud-manageable audio, video and control platform, built to deliver scalable, flexible AV solutions into the future. Learn more about the Q-SYS.
Included accessories:
C-rings and tile rails, rail screws, cut-out template, grille

Loudspeaker Mount Type - Ceiling
Powered (Active) - Yes
Warranty - Yes
Spec Sheet available - Yes

Height: 4.13 in
Width: 8.46 in
Maximum SPL (Sound Pressure Level): 108 dB
Product Weight: 3.50 lbs
Color: White
Warranty (Length/Type): 3 Years
Construction: ABS baffle on powder steel back can, Powder coated steel
Minimum Frequency Response (Bandwidth): 100 Hz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Speaker Diameter (Driver): 4 in
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 50 F
Minimum Frequency Response (Bandwidth): 0.10 kHz
Certifications: UL/IEC
Coverage Horizontal: 120 degrees
Coverage Vertical: 120 degrees
Finish: Powder coated
DC Voltage: 24 Volts
Sustainability Rating: IP34

Loudspeaker 219187 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

25/70/100 volt In Ceiling or Wall 4 inch 2-way Fluted IMPP, 3/4 inch ALU Dome, 70mm

by Vanco International

4" 8ohm/70V On-Wall, Pendant Mount, Landscape Speaker

by Vanco International

5.25" 8ohm/70V On-Wall Speaker

by Vanco International