Cameras - Special Application : Related Special Application Cameras : Sound Control Technologies - RemoteCamUSB™ Kit

RemoteCamUSB™ Camera Extension Kit

Model: RemoteCamUSB™ Kit

Part #: RemoteCamUSB Kit

The RemoteCamUSB™ kit provides:
12V or 5V Camera Power (Up to 3A)
USB-A 5V Camera Power (Up to 1.2A)
USB Video typically up to 1080p30/720p60
UVC & RS232 Visca Camera Control

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

Expanding on the reliable and time-tested technology of SCT's RemoteCam™ platforms, the RemoteCamUSB™ is part of Sound Control Technologies' next generation product portfolio for USB PTZ cameras requiring USB & RS232 Visca control. The RemoteCamUSB™ camera Extension Kits offer a cost and time saving alternative when integrating USB PTZ cameras into a wide variety of presentation spaces, including connectivity between USB cameras and the table for BYOD (bring-your-own-device) soft client applications. The RemoteCamUSB™ Kits provide a reliable “transparent” link between the camera and codec/head-end. The RCU2-CE™ camera end module integrates seamlessly with our RCM™ Series wall mounts for an easy and clean installation.

The RemoteCamUSB™ kit provides:
12V or 5V Camera Power (Up to 3A)
USB-A 5V Camera Power (Up to 1.2A)
USB Video typically up to 1080p30/720p60
UVC & RS232 Visca Camera Control
Visca Control Loop
Distances up to 100M over a single CAT5e or CAT6 UTP Cable

Additional RemoteCamUSB™ Kit Details:
Cabling:
All application specific camera and codec/head-end cables and power supply are included in the kit. Standard CAT5e or CAT6 UTP cable is used, eliminating the need for low-skew or no-skew cable to further control deployment costs.
Standard UTP-568A or UTP-568B termination is used to reduce errors in the field.
SCT provides a power cable "Sniffer", or any traditional UTP cable tester can be utilized to confirm termination prior to SCT module integration.
Installation:
Head-end and camera modules entail small clean metal enclosures to provide secure cable management. Clearly marked connectors for UTP and codec/camera cables insure an easy and properly deployed solution.
Use Case:
Our expanding RemoteCamU™ product Line for integrating USB PTZ cameras now natively supports the following:
RCU2-BA8 for the ClearOne Unite 200 Camera.
RCU2-BA8 for the ClearOne Unite 150 Camera.
RCU2-BA8 for the HuddleCam HC10X, HC20X & HC30X Cameras.
RCU2-LRC for the Logitech Rally Camera.
RCU2-PRO for the Logitech PTZ PRO 2 Camera.
RCU2-BA8 for the Lumens VC-B30U Camera.
RCU2-BA8 for the Marshall CV610-UB Camera.
RCU2-E4C for the Poly Cube Camera.
RCU2-E4U for the Poly EagleEye IV USB Camera.
RCU2-BA8 for the Sony SRG-120DU Camera.
RCU2-BA8 for the VDO360 Saber20X Camera.
RCU2-BA8 for the VDO360 CompassX Camera.
RCU2-BA8 for the VHD V71U2 Camera.
RCU2-BA8 for the VHD V20C Camera.
RCU2-BA8 for the VHD VX110 Camera.
RCU2-BA8 for the VHD VX710N Camera.
RCU2-BA8 for the VHD VX710IL Camera.
RCU2-BA8 for the VHD VX120 Camera.

SCT_RCL-PRO_Application_Guide.pdf 312706 kb - Brochure

Project List

Installation of the RCM™ Series on-wall mount, the RCU2™ USB extension kit and Logitech Rally

Project List

Find a Dealer

Find a Distributor